|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
TH97/10561QM TW00/17276EM IATF 0060636 SGS TH07/1033 P6SMA480CA ~ P6SMA600CA VBR : 480 ~ 600 Volts PPK : 600 Watts FEATURES : * * * * * Bidirectional Transient voltage suppressor 600W surge capability at 1ms Excellent clamping capability Low zener impedance Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Pb / RoHS Free SURFACE MOUNT BI-DIRECTIONAL TRANSIENT VOLTAGE SUPPRESSOR SMA 1.3 0.2 5.3 0.35 4.2 0.25 2.3 0.2 1.6 0.25 2.6 0.15 MECHANICAL DATA : * * * * * Case : SMA Molded plastic Epoxy : UL94V-O rate flame retardant Lead : Lead Formed for Surface Mount Mounting position : Any Weight : 0.060 gram (Approximately) 1.6 0.25 Dimensions in millimeters DEVICES FOR UNIPOLAR APPLICATIONS For uni-directional without "C" Electrical characteristics apply in both directions MAXIMUM RATINGS Rating at 25 C ambient temperature unless otherwise specified. Rating Peak Power Dissipation at Ta = 25 C, Tp=1ms (Note1) Steady State Power Dissipation at T L = 75 C Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) (Note 3) Operating and Storage Temperature Range Notes: Symbol PPK PD Value Minimum 600 5.0 Unit Watts Watts IFSM 50 Amps. TJ, TSTG - 55 to + 150 C (1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 C per Fig. 1 (2) Mounted on copper Lead area at 5.0 mm 2 ( 0.013 mm thick ). (3) 8.3 ms single half sine-wave, duty cycle = 4 pulses per minutes maximum. Page 1 of 3 Rev. 01 : September 18, 2008 TH97/10561QM TW00/17276EM IATF 0060636 SGS TH07/1033 ELECTRICAL CHARACTERISTICS Breakdown Voltage @ It Type No. ( Note 1 ) VBR (V) Min. P6SMA480CA P6SMA510CA P6SMA540CA P6SMA600CA Notes: 456 485 513 570 Max. 504 535 567 630 It (mA) 1.0 1.0 1.0 1.0 (Rating at 25 C ambient temperature unless otherwise specified) Maximum Reverse Leakage @ VRWM IR (A) 5.0 5.0 5.0 5.0 Maximum Reverse Current IRSM (A) 0.91 0.86 0.81 0.76 Maximum Clamping Voltage @ IRSM VRSM (V) 658 698 740 789 Maximum Temperature Co-efficient of VBR (% / C) 0.110 0.110 0.110 0.110 Working Peak Reverse Voltage VRWM (V) 408 434 459 510 (1) VBR measured after It applied for 300 s., It = square wave pulse or equivalent. (2) "P6SMA" will be omitted in marking on the diode. Page 2 of 3 Rev. 01 : September 18, 2008 TH97/10561QM TW00/17276EM IATF 0060636 SGS TH07/1033 RATING AND CHARACTERISTIC CURVES ( P6SMA480CA ~ P6SMA600CA ) FIG.1 - PULSE DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES 60 120 PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT 100 50 40 80 60 40 30 20 20 0 0 25 50 75 100 125 150 175 10 0 1 8.3 ms SINGLE HALF SINE WAVE JEDEC METHOD 2 4 6 10 20 40 60 100 Ta, AMBIENT TEMPERATURE, ( C) FIG.3 - STEADY STATE POWER DERATING NUMBER OF CYCLES AT 60Hz FIG.4 - PULSE RATING CURVE 5.00 100 PD, STEADY STATE POWER DISSIPATION (WATTS) 3.75 Pp,PEAK POWER (kW) Single Phase Half Wave 60 Hz Resistive or Inductive load 0 25 50 75 100 125 150 175 200 10 2.50 1.0 1 25 0.1 0.1s 1.0s 10s 100s 1.0ms 10ms 0 tp, PULSE WIDTH TL, LEAD TEMPERATURE (C) FIG.5 - PULSE WAVEFORM PEAK PULSE CURRENT - % IRMS Tr = 10s 100 Peak Value IRMS TJ=25 C Pulse Width (tp) is defined as that point where the peak current decays to 50% of IRSM 50 Half Value - IRMS 2 10X1000 Waveform as defined by R.E.A. tp 0 0 1.0 2.0 3.0 4.0 T, TIME(ms) Page 3 of 3 Rev. 01 : September 18, 2008 |
Price & Availability of P6SMA480CA |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |